source: trunk/grails-app/i18n/messages.properties @ 674

Last change on this file since 674 was 668, checked in by gav, 14 years ago

New report: Inventory Value.

File size: 24.2 KB
RevLine 
[621]1#
2# Custom and domain constraint messages.
3#
4
[397]5address.owner.not.found=An owner (Person, Site, Manufacturer or Supplier) must be supplied to create an address.
[402]6contact.owner.not.found=An owner (Person, Site, Manufacturer or Supplier) must be supplied to create contact details.
[397]7
[271]8asset.tree.import.success=Asset tree imported.
[421]9asset.tree.import.failure=Could not create asset tree from supplied file, failed on line {0}, see {1}.
[271]10
[414]11inventory.import.success=Inventory imported.
[421]12inventory.import.failure=Could not create inventory from supplied file, failed on line {0}, see {1}.
[414]13
[635]14inventoryItemPictures.import.success=Inventory item pictures imported, see {0}.
15inventoryItemPictures.import.failure.no.directory=Import directory on server not found.
16inventoryItemPictures.import.failure.to.unzip=Failed to unzip supplied file.
[636]17inventoryItemPictures.import=Picture Import
18inventoryItemPictures.import.help=A zip file of pictures (max 100MB) or singles pictures may be imported. Pictures \
19    must have the same file names as existing inventory items.
[635]20
[440]21inventoryItemPurchase.import.success=Inventory item purchases imported.
22inventoryItemPurchase.import.failure=Could not create inventory item purchases from supplied file, failed on line {0}, see {1}.
23
24person.import.success=Person list imported.
25person.import.failure=Could not create persons from supplied file, failed on line {0}, see {1}.
26
[429]27asset.copy.subItem.create.failure=Could not complete operation, as sub item failed to save.
28asset.copy.subItem.too.many.failure=Could not complete operation, as there appears to be too many sub items.
[278]29asset.copy.method.required=Please select a copy method for sub items.
30asset.copy.method=Copy Method
31asset.copy.method.help=Link creates a new asset and links it to EXISTING sub items. \
[429]32    While copy creates a new asset and new sub items by appending '(id:#)' to create unique sub item names.
[284]33asset.copy.asset.required=Please select an asset to copy.
[278]34
[360]35maintenanceActions.still.associated=Could not complete operation as maintenance actions are still associated \
36    with this item.
37maintenanceActions.still.associated.subItem=Could not complete operation as maintenance actions are still associated \
38    with a sub item.
39inventoryStores.still.associated=Could not complete operation as inventory stores are still associated with this item.
[350]40
[360]41site.section.delete.failure=Could not complete operation as sections failed to delete.
42section.asset.delete.failure=Could not complete operation as assets failed to delete.
[350]43asset.subItems.delete.failure=Could not complete operation as orphan sub items failed to delete.
44
[285]45assetSubItem.asset.not.found=Could not complete operation as an asset was supplied but not found.
[347]46assetSubItem.assets.associated=Could not complete operation as assets are still associated with this sub item.
[285]47
[257]48sub.task.create.confirm=Immediately create and save a new sub task?
49
[73]50person.pass.minSize.notmet=Password is less than the minimum size of [{3}]
51person.pass.blank=Password cannot be blank
[99]52person.pass.doesNotMatch=Passwords must match
[73]53
[633]54costCode.name.not.unique.for.purchasing.group=CostCode name must be unique for purchasingGroup.
55
[609]56#
[621]57# Help Balloon and property definitions.
[609]58#
59
[621]60# Report help balloon messages.
61report.stock.take.overview=Stock Take (Overview)
62report.stock.take.overview.help=Use this report to manage inventory stock take. Use in conjunction with the Stock Take (By Location) report.
63report.stock.take.by.location=Stock Take (Location)
64report.stock.take.by.location.help=Enter a comma separated list of inventory locations. \
65    Use the Stock Take (Overview) report to get the list of locations. A % symbol may be used as a wild card, e.g: X1, X2, Y%, Z%7
66
67# Person properties.
[166]68person.personGroups=Person Groups
[242]69person.personGroups.help=Groups may be assigned to tasks and \
70may also provide a record of persons qualified or trained in a specific area. \
[290]71    Groups provide no application authorisations.
[633]72person.purchasingGroups=Purchasing Groups
73person.purchasingGroups.help=Purchasing groups determine the available cost codes that a person may purchase against.
[166]74person.loginName=Login Name
75person.loginName.help=This is the id or name that the person will use to login to the application.
76person.firstName=First Name
77person.firstName.help=The person's real first name.
78person.lastName=Last Name
79person.lastName.help=The person's real last name.
80person.password=Password
[239]81person.password.help=The password that the person will use to login to the application (should be changed by them later).
[166]82person.isActive=Active
83person.isActive.help=Disable this to prevent a person logging in to the application.
84
85person.authorities=Authorities
[320]86person.authorities.help=Give this person authority to do things in the application. \
87    The user must logout for changes to take effect.
[166]88
[609]89# InventoryItemPurchase properties.
90inventoryItemPurchase.purchaseOrderNumber=Purchase Order #
91inventoryItemPurchase.purchaseOrderNumber.help=This number must be exact in case and spacing. \
92    All purchase received and invoice approval requires this number to track correctly. \
93    The number may only appear once for each inventory item. \
94    To enter multiple line items for a purchase order # 'M123' use 'M123.1' and 'M123.2' for example.
95inventoryItemPurchase.order.placed.date=Date
96inventoryItemPurchase.order.placed.date.help=The date that the order was placed. \
97    May be adjusted at the end of financial years. Also see the 'date created' and 'last updated' properties.
98inventoryItemPurchase.cost.code=Cost Code
99inventoryItemPurchase.cost.code.help=Cost codes assign cost to the correct asset and accouting ledger number/account. \
100    Ideally cost codes should be asset based and reflect the asset tree.
101inventoryItemPurchase.task.budget.status=Budget Status
102inventoryItemPurchase.task.budget.status.help=Was this purchase planned for in the budget or is it an unplanned spend.
103inventoryItemPurchase.supplier=Supplier
104inventoryItemPurchase.supplier.help=The supplier to make the purchase out to.
105inventoryItemPurchase.quantity=Quantity
106inventoryItemPurchase.quantity.help=The number of inventory item units purchased.
107inventoryItemPurchase.receive.quantity=Receive Quantity
108inventoryItemPurchase.receive.quantity.help=The number of inventory item units received.
109inventoryItemPurchase.approve.quantity=Approve Quantity
110inventoryItemPurchase.approve.quantity.help=The number of inventory item units to approve payment for.
111inventoryItemPurchase.order.value=Order Value
112inventoryItemPurchase.order.value.help=The total value of this line item.
113inventoryItemPurchase.receive.value=Receive Value
114inventoryItemPurchase.receive.value.help=The value of items received.
115inventoryItemPurchase.approve.value=Approve Value
116inventoryItemPurchase.approve.value.help=The value to approve payment for.
117inventoryItemPurchase.invoice.number=Invoice Number
118inventoryItemPurchase.invoice.number.help=The invoice number that this line item approves payment for.
119
[98]120entry.duration=Duration
121entry.duration.help=The time (hh:mm) booked against this entry for date done.
[431]122entry.duration.fault=Down Time.
[464]123entry.duration.fault.help=The production down time (hh:mm) directly attributable to this fault.
[230]124entry.date.done=Date Done
125entry.date.done.help=The date on which the event actually occurred.
126entry.comment.fault=Fault
[437]127entry.comment.fault.help=Techinical description of the fault and what is happening, NOT what needs doing!
[418]128entry.comment.cause=Cause
129entry.comment.cause.help=The root cause of the fault. Professional opinion on any faults. \
130Include condition and contributing factors.
[230]131entry.comment.work.done=Work Done
[418]132entry.comment.work.done.help=Describe the work that was done.
[431]133entry.productionReference.fault=Production Reference
134entry.productionReference.fault.help=The production during which the fault occurred.
[98]135
[242]136assignedGroup.estimatedDuration=Estimated Duration
137assignedGroup.estimatedDuration.help=The estimated amount of time (hh:mm) that you would \
138like to assign this group to the task.
139
[147]140assignedPerson.estimatedDuration=Estimated Duration
[242]141assignedPerson.estimatedDuration.help=The estimated amount of time (hh:mm) that you would \
142like to assign this person to the task.
[147]143
[510]144task.delete.failure.production=Tasks may not be deleted in production mode, \
145    set the trash flag instead.
[203]146task.notFound=Could not complete operation, task not found.
[191]147task.operationNotPermittedOnCompleteTask=This operation is not permitted on a complete task.
[196]148task.operationNotPermittedOnTaskInTrash=This operation is not permitted on a task that is in the trash.
[631]149task.operationNotPermittedOnRecurringTaskWithoutAuth=This operation is not permitted on a recurring task without authorisation.
[203]150task.failedToSave=Could not complete operation, task failed to save.
151task.modifications.failedToSave=Could not complete operation, as task modification record failed to save.
[243]152task.assignedGroups.failedToSave=Could not complete operation, as assignedGroup record failed to save.
153task.assignedPersons.failedToSave=Could not complete operation, as assignedPerson record failed to save.
[203]154tast.taskRecurringSchedule.alreadyExists=This task already has a recurring schedule.
[446]155task.targetCompletionDate.before.targetStartDate=The target completion date must be equal to or greater than \
156    the target start date.
[180]157
[482]158entry.create.no.params=Please select a task, then add an entry.
159
[207]160taskRecurringSchedule.notFound=Could not complete operation, recurring schedule not found.
[254]161personGroup.not.found=Person Group not found, it may have been deleted.
[255]162person.not.found=Person record not found, it may have been deleted.
[207]163
[592]164# Task Properties.
[242]165task.assignedGroups=Assigned Groups
166task.assignedGroups.help=The person groups assigned to work on this task during planning along with estimated time.
[106]167task.assignedPersons=Assigned Persons
168task.assignedPersons.help=The persons assigned to work on this task during planning along with estimated time.
169task.description=Task Description
170task.description.help=Short basic description of the task.
[431]171task.description.immediateCallout=Immediate Callout Description.
[437]172task.description.immediateCallout.help=Short description of the callout from an operations perspective.
[106]173task.comment=Task Comment
174task.comment.help=Long text for additional info, only shown in detail views.
175task.targetStartDate=Target Start Date
176task.targetStartDate.help=The date we would like the task to start, set during scheduling.
[431]177task.targetStartDate.immediateCallout=Callout Date
178task.targetStartDate.immediateCallout.help=The date the callout occured.
[106]179task.targetCompletionDate=Target Completion Date
180task.targetCompletionDate.help=The date we would like the task to be completed by, set during scheduling.
181task.leadPerson=Lead Person
182task.leadPerson.help=The primay contact person.
[592]183task.safetyRequirement=Safety Requirment
184task.safetyRequirement.help=Completion of this task is a safety requirement. \
185    This task must be completed and is not allowed to be missed.
186task.mandatoryRegulatory=Mandatory/Regulatory
187task.mandatoryRegulatory.help=Completion of this task is a mandatory or regulatory requirement. \
188    This task must be completed and is not allowed to be missed.
189task.positiveFault=Positive Fault
190task.positiveFault.help=Set false if unsure. Used to calculate preventative efficiency or P.E.
191
192# Task Actions
[431]193task.status.resolved=Resolved.
[437]194task.status.resolved.help=Indicate that root cause is known and has been completely resolved.
[431]195task.status.unresolved=Unresolved.
[437]196task.status.unresolved.help=Indicate that this task requires further attention, root cause is either unknown or unresolved.
[166]197
[213]198taskRecurringSchedule.nextTargetStartDate.mayNotBePast=Please select a start date that is not in the past.
199taskRecurringSchedule.nextTargetStartDate=Next Target Start Date
200taskRecurringSchedule.nextTargetStartDate.help=The target start date for the next auto generated sub task.
201taskRecurringSchedule.recurEvery=Recur Every
202taskRecurringSchedule.recurEvery.help=How often this task should recur. Determines the period between sub task target start dates.
203taskRecurringSchedule.taskDuration=Task Duration
204taskRecurringSchedule.taskDuration.help=How long to allow for the task. Determines the target completion date of the sub tasks.
205taskRecurringSchedule.generateAhead=Generate Ahead
206taskRecurringSchedule.generateAhead.help=How far ahead of the next target start date to generate sub tasks. \
[445]207    This allows work packs to be built and work load to be seen and planned. \
208    Only generate ahead as far as short term planning is done, since all generated sub task \
209    values will be set and therefore time consuming to change.
210taskRecurringSchedule.maxSubTasks=Max Sub Tasks
211taskRecurringSchedule.maxSubTasks.help=Maximum number of sub tasks to generate. Set to 0 \
212    for no limit.
213taskRecurringSchedule.useTargetCompletionDate=Target Completion
214taskRecurringSchedule.useTargetCompletionDate.help=On to use the parent task's target completion date. \
215    Off to continue generation past the parent task's target completion date.
[213]216taskRecurringSchedule.enabled=Enabled
[445]217taskRecurringSchedule.enabled.help=On to enable automatic sub task generation. \
218    Off to stop automatic sub task generation. <br /><br />\
219    The system will turn this off if there are no further sub tasks to be generated.
[106]220
[166]221task.primaryAsset=Primary Asset
222task.primaryAsset.help=This is the asset that costs will be assigned to.
223task.associatedAssets=Associated Assets
224task.associatedAssets.help=These assets are to be associated with this task, but costs will not be assigned.
225
[610]226# InventoryItem Messages.
[584]227inventory.item.is.obsolete=This item has been flagged as obsolete.
228inventory.item.not.active=This item has been flagged as not active.
[610]229inventory.item.reorder.not.allowed=Reorder not allowed.
230inventory.item.reorder.listing.disabled=This item has reorder listing disabled and will not appear on reorder lists.
[548]231inventory.item.already.has.picture=Inventory item already has a picture, please delete the old picture first.
232inventory.item.picture.file.unrecognised=Image file [{0}]: type not recognised.
[549]233inventory.item.picture.source.not.supported=Image source type not supported.
[548]234
[177]235inventoryMovement.quantity.insufficientItemsInStock=Could not complete operation, insufficient items in stock.
236inventoryMovement.inventoryItem.notFound=Inventory Item not found.
[425]237inventoryMovement.still.associated=Could not complete operation as inventory movements are still associated with this item.
[177]238
[599]239inventoryItemPurchase.purchaseOrderNumber.not.unique.for.inventory.item.order=Purchase Order Number must be unique for this inventory item order.
[440]240inventoryItemPurchase.invoiceNumber.required=An invoice number must be supplied to approve payment.
241inventoryItemPurchase.delete.failure.received.exists=Could not delete, items have been received.
242inventoryItemPurchase.delete.failure.payment.approved=Could not delete, payment has been approved.
[610]243inventoryItemPurchase.operation.not.permitted.on.inactive.or.obsolete.item=This operation is not permitted on an inactive or obsolete inventory item.
[633]244inventoryItemPurchase.costCodes.not.found=No cost codes found, a person needs to be assigned to a purchasing group that has cost codes.
[440]245
[247]246assignedGroup.task.not.found=Please select a task and then ''Add Assigned Group''.
[249]247assignedPerson.task.not.found=Please select a task and then ''Add Assigned Person''.
[247]248
[621]249#
250# Default messages.
251#
252
[247]253default.list.failure=Could not generate list for class {0}.
254default.not.found={0} {1} not found, it may have been deleted.
255default.delete.success={0} {1} deleted.
256default.delete.failure={0} {1} could not be deleted.
257default.update.success={0} {1} updated.
258default.update.failure={0} {1} could not be updated.
259default.create.success={0} {1} created.
[263]260default.create.failure={0} could not be created.
[247]261default.optimistic.locking.failure=Another user has updated this item while you were editing, please check the updated values.
[414]262default.file.over.max.size=Supplied file is greater than max size of {0} {1}.
263default.file.not.supplied=No file supplied.
264default.file.no.header=The supplied file does not have the correct header lines, please see the template file.
[548]265default.not.development.environment.failure=Could not complete operation, dev environment not detected.
[247]266
[55]267default.doesnt.match.message=Property [{0}] of class [{1}] with value [{2}] does not match the required pattern [{3}]
268default.invalid.url.message=Property [{0}] of class [{1}] with value [{2}] is not a valid URL
269default.invalid.creditCard.message=Property [{0}] of class [{1}] with value [{2}] is not a valid credit card number
270default.invalid.email.message=Property [{0}] of class [{1}] with value [{2}] is not a valid e-mail address
271default.invalid.range.message=Property [{0}] of class [{1}] with value [{2}] does not fall within the valid range from [{3}] to [{4}]
272default.invalid.size.message=Property [{0}] of class [{1}] with value [{2}] does not fall within the valid size range from [{3}] to [{4}]
273default.invalid.max.message=Property [{0}] of class [{1}] with value [{2}] exceeds maximum value [{3}]
274default.invalid.min.message=Property [{0}] of class [{1}] with value [{2}] is less than minimum value [{3}]
275default.invalid.max.size.message=Property [{0}] of class [{1}] with value [{2}] exceeds the maximum size of [{3}]
276default.invalid.min.size.message=Property [{0}] of class [{1}] with value [{2}] is less than the minimum size of [{3}]
277default.invalid.validator.message=Property [{0}] of class [{1}] with value [{2}] does not pass custom validation
278default.not.inlist.message=Property [{0}] of class [{1}] with value [{2}] is not contained within the list [{3}]
279default.blank.message=Property [{0}] of class [{1}] cannot be blank
280default.not.equal.message=Property [{0}] of class [{1}] with value [{2}] cannot equal [{3}]
281default.null.message=Property [{0}] of class [{1}] cannot be null
282default.not.unique.message=Property [{0}] of class [{1}] with value [{2}] must be unique
283
284default.paginate.prev=Previous
[476]285default.paginate.prev.abbrev=Prev
[55]286default.paginate.next=Next
287
[476]288default.close.text=Close
289default.options.text=Options
290default.none.text=None
[485]291default.all.text=All
[601]292default.please.select.text=--Please-Select--
293default.none.select.text=--None--
[652]294default.all.select.text=--All--
[476]295
[621]296#
[155]297# Rich UI plugin - Calendar
[621]298#
299
[155]300default.time=Time
301default.week=Week
302default.monday=Mon
303default.tuesday=Tues
304default.wednesday=Wed
305default.thursday=Thu
306default.friday=Fri
307default.saturday=Sat
308default.sunday=Sun
309
[621]310#
[55]311# Data binding errors. Use "typeMismatch.$className.$propertyName to customize (eg typeMismatch.Book.author)
[621]312#
313
[55]314typeMismatch.java.net.URL=Property {0} must be a valid URL
315typeMismatch.java.net.URI=Property {0} must be a valid URI
316typeMismatch.java.util.Date=Property {0} must be a valid Date
317typeMismatch.java.lang.Double=Property {0} must be a valid number
318typeMismatch.java.lang.Integer=Property {0} must be a valid number
319typeMismatch.java.lang.Long=Property {0} must be a valid number
320typeMismatch.java.lang.Short=Property {0} must be a valid number
321typeMismatch.java.math.BigDecimal=Property {0} must be a valid number
[73]322typeMismatch.java.math.BigInteger=Property {0} must be a valid number
323
[621]324#
[139]325# Navigation plugin, see conf/Config.groovy for menu's.
326# Subitems are not currently resolving with this plugin.
[621]327#
328
[139]329navigation.nav.home=Home
330navigation.nav.home.start=Start
331navigation.nav.home.appAdmin=Admin
332navigation.nav.home.manager=Manager
333navigation.nav.home.changeSessionTimeout=Timeout
334navigation.nav.home.changePassword=Password
[73]335
[139]336navigation.nav.tasks=Tasks
337navigation.nav.tasks.create=Create
338navigation.nav.tasks.search=Search
339navigation.nav.tasks.show=Show
340
341navigation.nav.inventory=Inventory
342navigation.nav.assets=Assets
[168]343
[621]344#
[168]345# FilterPane plugin, properties.
[621]346#
347
[168]348fp.property.text.associatedAssets.name=Associated Asset
349fp.property.text.primaryAsset.name=Primary Asset
[181]350fp.property.text.trash=Trash
351fp.property.text.scheduled=Scheduled
352fp.property.text.approved=Approved
[175]353fp.property.text.isObsolete=Obsolete
[168]354fp.property.text.taskGroup.name=Group
355fp.property.text.taskPriority.name=Priority
356fp.property.text.taskStatus.name=Status
357fp.property.text.description=Description
358fp.property.text.comment=Comment
359fp.property.text.leadPerson.lastName=Lead Person (Last Name)
360fp.property.text.leadPerson.firstName=Lead Person (First Name)
361fp.property.text.taskType.name=Type
[175]362fp.property.text.inventoryLocation.name=Location
363fp.property.text.spareFor.name=Spare For
364fp.property.text.supplier.name=Supplier
365fp.property.text.manufacturer.name=Manufacturer
[437]366fp.property.text.estimatedUnitPriceAmount=Estimated Unit Price
[468]367
368fp.property.text.inventoryItemPurchaseType.name=Type
[476]369
[621]370#
371# TaskSearch Service.
372#
373
[503]374task.search.text.all.tasks.message=All tasks for {0}.
375task.search.text.all.tasks.none.found=No tasks found for {0}.
376task.search.text.all.tasks.between.message=All tasks between {0} and {1}.
377task.search.text.all.tasks.between.none.found=No tasks found between {0} and {1}.
378
379task.search.text.persons.tasks.message=Tasks for {0} on {1}.
380task.search.text.persons.tasks.none.found=No tasks found for {0} on {1}.
381task.search.text.persons.tasks.between.message=Tasks for {0} between {1} and {2}.
382task.search.text.persons.tasks.between.none.found=No tasks found for {0} between {1} and {2}.
383
384task.search.text.my.todays=Today
385task.search.text.my.todays.description=My tasks and approved tasks that I am assigned to.
386task.search.text.my.yesterdays=Yesterday
387task.search.text.my.tomorrows=Tomorrow
388task.search.text.my.past.week=Past Week
389task.search.text.todays=Today
390task.search.text.todays.description=All tasks that are not in the trash bin.
391task.search.text.yesterdays=Yesterday
392task.search.text.tomorrows=Tomorrow
393task.search.text.past.week=Past Week
394task.search.text.budget.unplanned=Unplanned Tasks
395task.search.text.budget.unplanned.message=Tasks with budget status of 'Unplanned' between {0} and {1}.
396task.search.text.budget.unplanned.none.found=No tasks found with budget status of 'Unplanned' between {0} and {1}.
397task.search.text.budget.planned=Planned Tasks
398task.search.text.budget.planned.description=Task with budget status of Planned, in the past week.
399task.search.text.budget.planned.message=Tasks with budget status of 'Planned' between {0} and {1}.
400task.search.text.budget.planned.none.found=No tasks found with budget status of 'Planned' between {0} and {1}.
401task.search.text.planners.range=Planners Range
402task.search.text.planners.range.description=Tasks in the past week and two weeks ahead.
[485]403task.search.calendar.text.too.many.results=Too many results, only {0} are shown.
[490]404task.search.text.work.done=Work Done
405task.search.text.work.done.description=Work done by person and date.
406task.search.text.work.done.message=Work done by {0} on {1}.
[503]407task.search.text.work.done.none.found=No entries found for {0} on {1}.
[485]408
[621]409#
[485]410# InventoryItemSearch
[621]411#
412
[565]413inventoryItem.search.searchText=Search
414inventoryItem.search.searchText.help=By default all words are matched and results are sorted by relevance. \
415    A * symbol may be used as a wild card, e.g: '2305*' would find 2305RS and 2305-RS. A + symbol may be used to require a word \
416    e.g: 'sensor +print' would require results to have 'print' in the searched categories.
[562]417inventoryItem.search.text.found=Results for: {0}
418inventoryItem.search.text.none.found=No results for: {0}
[530]419inventoryItem.search.text.below.reorder=Below Reorder
[616]420inventoryItem.search.text.below.reorder.description=Inventory items at or below reorder point.
[485]421inventoryItem.search.text.below.reorder.all=Below Reorder (all)
[616]422inventoryItem.search.text.below.reorder.all.description=Inventory items at or below reorder point, including reorder listing disabled.
[485]423inventoryItem.search.text.below.reorder.none.found=No inventory items found at or below reorder point.
424inventoryItem.search.text.all.description=All inventory items.
[489]425inventoryItem.search.text.all.none.found=No inventory items found.
426inventoryItem.search.text.recently.used=Recently Used
427inventoryItem.search.text.recently.used.description=Items used in the last {0} days.
428inventoryItem.search.text.recently.used.none.found=No items used in the last {0} days.
[546]429
[621]430#
[548]431# Report error messages.
[621]432#
433
[548]434report.error.too.many.results=Error: over {0} results, please run report again.
435report.error.no.locations.found=Error: no locations found, please run report again.
436report.error.too.many.locations=Error: over {0} locations, please run report again.
437report.error.no.inventory.items.found=Error: no inventory items found, please run report again.
438report.error.too.many.inventory.items=Error: over {0} inventory items, please run report again.
[668]439report.error.multiple.currency.found=Error: multiple currency found.
[622]440
441#
442# AppCore messages.
443#
444appCore.rebuild.text.search.index=The text search index is being rebuilt in the background, see log file for details.
Note: See TracBrowser for help on using the repository browser.